Ruizhengwei Electronics

					PDF
5962-8777101MCA	Analog Devices	-	14-CDIP (0.300", 7.62mm)	OP400 is a low 11 nV/√Hz at 10 Hz, half that of most competitive devices. The OP400 is an ideal choice for applications requiring multiple precision operational amplifiers and where low power consumption is critical.	DataSheet	108
5962-9151901M2A	Analog Devices	-	20-CLCC	providing superior speed with excellent dc performance. Ultrahigh open-loop gain (1 kV/mV minimum), low offset voltage, and superb gain linearity makes the	DataSheet	584.495
5962-9151901MPA	Analog Devices	-	20-CLCC	providing superior speed with excellent dc performance. Ultrahigh open-loop gain (1 kV/mV minimum), low offset voltage, and superb gain linearity makes the	DataSheet	564.925
5962-9313001MPA	Analog Devices	-	8-CDIP (0.300", 7.62mm)	The AD830 is a wideband, differencing amplifier designed for use at video frequencies but also useful in many other applications. It accurately	DataSheet	93.18
5962-9313201MPA	Analog Devices	-	8-CERDIP	0.04° (NTSC) make the AD810 ideal for any broadcast quality video system. All these specifications are under load conditions of 150 Ω (one 75 Ω back	DataSheet	70.4631
5962-9452101M2A	Analog Devices	-	20-CLCC	currents at all temperatures. This is in contrast to FET input op amps whose bias currents start in the picoamp range at 25°C but double for every 10	DataSheet	355.825
5962-9457201MEA	Analog Devices	-	16-SOIC (0.154", 3.90mm Width)	independent of the gain. The SNR for a 1 V rms output and a 1 MHz noise bandwidth is typically 76 dB for the AD600 and 86 dB for the AD602. The amplitude	DataSheet	279.78
5962-9459301MPA	Analog Devices	-	-	ideal for buffer high speed A-to-D converters. The AD8001 offers low power of 5.5 mA max (VS = ±5 V) and can run on a single +12 V power supply, while	DataSheet	124.295
AD8044ARZ-14-REEL7	Analog Devices	-	14-SOIC (0.154", 3.90mm Width)	capability with an input voltage range extending 200 mV below the negative rail and within 1 V of the positive rail. The output voltage swing extends	DataSheet	15.3
ADCMP341YRJZ-REEL7	Analog Devices	-	SOT-23-8	, industrial, and automotive applications. Applications Portable applications Li-Ion monitoring Handheld instruments LED/relay driving Optoisolator driving Control systems	DataSheet	3.145
ADCMP350YKSZ-REEL7	Analog Devices	-	SC-82A, SOT-343	and output structures will allow voltages of up to 22 V on the input of all devices and the output of the open-drain devices. High performance over the	DataSheet	1.178
ADCMP370AKSZ-REEL7	Analog Devices	-	5-TSSOP, SC-70-5, SOT-353	Comparator Single R-R I/P 5.5V 5-Pin SC-70 T/R / IC COMPARATOR OPEN-DRAIN SC70-5	DataSheet	0.8982
ADCMP600BKSZ-REEL7	Analog Devices	-	5-TSSOP, SC-70-5, SOT-353	designed to drive up to 5 pF with full timing specs and to degrade in a graceful and linear fashion as additional capacitance is added. The comparator input	DataSheet	5.6955
ADCMP600BRJZ-REEL7	Analog Devices	-	SC-74A, SOT-753	Analogue Comparator, Single, High Speed, 1, 5 Ns, 2.5V To 5.5V, Sot-23, 5 Rohs Compliant: Yes	DataSheet	6.335
ADCMP601BKSZ-REEL7	Analog Devices	-	6-TSSOP, SC-88, SOT-363	designed to drive up to 5 pF with full timing specs and to degrade in a graceful and linear fashion as additional capacitance is added. The comparator input	DataSheet	6.505
ADCMP602BRMZ-REEL7	Analog Devices	-	8-MSOP	designed to drive up to 5 pF with full timing specs and to degrade in a graceful and linear fashion as additional capacitance is added. The comparator input	DataSheet	6.638
ADCMP606BKSZ-REEL7	Analog Devices	-	6-TSSOP, SC-88, SOT-363	jitter (RJ). Overdrive and slew rate dispersion are typically less than 50 ps. A flexible power supply scheme allows the devices to operate with a single	DataSheet	8.005
CMP401GSZ	Analog Devices	-	16-SOIC (0.154", 3.90mm Width)	COMPARATOR, LV, 23NS, 16SOIC; Comparators, No. of:4; Comparator Type:Low Voltage; Time, Response:23ns; Output Type:CMOS/TTL; Current, Supply:6.5mA	DataSheet	10.165
CMP401GS	Analog Devices	-	16-SOIC (0.154", 3.90mm Width)	The CMP401 and CMP402 are 23 ns and 65 ns quad comparators with separate input and output supplies. Separate supplies enable the input stage to be	DataSheet	15.2575
CMP04FS	Analog Devices	-	14-SOIC (0.154", 3.90mm Width)	Comparator Quad ±18 Volt 36 Volt 14-Pin SOIC N	DataSheet	33.865
CS30CL	STMicroelectronics	-	SC-74A, SOT-753	High side current sense high voltage op amp, 300uA, 24V, -40 to 125°C, SOT23-5L, Tape and Reel	DataSheet	1.3989
MCP65R46T-2402E/CHY	Microchip	-	SOT-23-6	IC, COMP, LP, SINGLE, 6SOT23; Comparator Type:Low Power; No. of Comparators:1; Response Time:4µs; IC Output Type:Open Drain; Supply Current:2.5µA	DataSheet	0.859
MCP6N11T-005E/MNY	Microchip	-	8-TDFN (2x3)	600 uA 500 kHz Single Instrumentation Amplifier Gmin=+5.	DataSheet	3.06
HMC675LC3CTR-R5	Analog Devices	-	16-LFQFN Exposed Pad	support 10 Gbps operation while providing 100 ps propagation delay and 60 ps minimum pulse width with 0.2 ps rms random jitter (RJ). Overdrive and slew	DataSheet	181.5409
HMC674LC3CTR	Analog Devices	-	16-LFQFN Exposed Pad	PECL output stages are designed to directly drive 400 mV into 50 Ω terminated to +1.3 V while maintaining compatibility with other PECL logic families	DataSheet	175.92

Someone has searched this part IC Chips and others have searched some relevant parts as the following:

5962-8777101MCA

：

Analog Devices

：

14-CDIP (0.300", 7.62mm)

：

OP400 is a low 11 nV/√Hz at 10 Hz, half that of most competitive devices. The OP400 is an ideal choice for applications requiring multiple precision operational amplifiers and where low power consumption is critical.

5962-9151901M2A

：

Analog Devices

：

20-CLCC

：

providing superior speed with excellent dc performance. Ultrahigh open-loop gain (1 kV/mV minimum), low offset voltage, and superb gain linearity makes the

5962-9151901MPA

：

Analog Devices

：

20-CLCC

：

providing superior speed with excellent dc performance. Ultrahigh open-loop gain (1 kV/mV minimum), low offset voltage, and superb gain linearity makes the

5962-9313001MPA

：

Analog Devices

：

8-CDIP (0.300", 7.62mm)

：

The AD830 is a wideband, differencing amplifier designed for use at video frequencies but also useful in many other applications. It accurately

5962-9313201MPA

：

Analog Devices

：

8-CERDIP

：

0.04° (NTSC) make the AD810 ideal for any broadcast quality video system. All these specifications are under load conditions of 150 Ω (one 75 Ω back

5962-9452101M2A

：

Analog Devices

：

20-CLCC

：

currents at all temperatures. This is in contrast to FET input op amps whose bias currents start in the picoamp range at 25°C but double for every 10

5962-9457201MEA

：

Analog Devices

：

16-SOIC (0.154", 3.90mm Width)

：

independent of the gain. The SNR for a 1 V rms output and a 1 MHz noise bandwidth is typically 76 dB for the AD600 and 86 dB for the AD602. The amplitude

5962-9459301MPA

：

Analog Devices

：

ideal for buffer high speed A-to-D converters. The AD8001 offers low power of 5.5 mA max (VS = ±5 V) and can run on a single +12 V power supply, while

AD8044ARZ-14-REEL7

：

Analog Devices

：

14-SOIC (0.154", 3.90mm Width)

：

capability with an input voltage range extending 200 mV below the negative rail and within 1 V of the positive rail. The output voltage swing extends

ADCMP341YRJZ-REEL7

：

Analog Devices

：

SOT-23-8

：

, industrial, and automotive applications. Applications Portable applications Li-Ion monitoring Handheld instruments LED/relay driving Optoisolator driving Control systems

ADCMP350YKSZ-REEL7

：

Analog Devices

：

SC-82A, SOT-343

：

and output structures will allow voltages of up to 22 V on the input of all devices and the output of the open-drain devices. High performance over the

ADCMP370AKSZ-REEL7

：

Analog Devices

：

5-TSSOP, SC-70-5, SOT-353

：

Comparator Single R-R I/P 5.5V 5-Pin SC-70 T/R / IC COMPARATOR OPEN-DRAIN SC70-5

ADCMP600BKSZ-REEL7

：

Analog Devices

：

5-TSSOP, SC-70-5, SOT-353

：

designed to drive up to 5 pF with full timing specs and to degrade in a graceful and linear fashion as additional capacitance is added. The comparator input

ADCMP600BRJZ-REEL7

：

Analog Devices

：

SC-74A, SOT-753

：

Analogue Comparator, Single, High Speed, 1, 5 Ns, 2.5V To 5.5V, Sot-23, 5 Rohs Compliant: Yes

ADCMP601BKSZ-REEL7

：

Analog Devices

：

6-TSSOP, SC-88, SOT-363

：

designed to drive up to 5 pF with full timing specs and to degrade in a graceful and linear fashion as additional capacitance is added. The comparator input

ADCMP602BRMZ-REEL7

：

Analog Devices

：

8-MSOP

：

designed to drive up to 5 pF with full timing specs and to degrade in a graceful and linear fashion as additional capacitance is added. The comparator input

ADCMP606BKSZ-REEL7

：

Analog Devices

：

6-TSSOP, SC-88, SOT-363

：

jitter (RJ). Overdrive and slew rate dispersion are typically less than 50 ps. A flexible power supply scheme allows the devices to operate with a single

CMP401GSZ

：

Analog Devices

：

16-SOIC (0.154", 3.90mm Width)

：

COMPARATOR, LV, 23NS, 16SOIC; Comparators, No. of:4; Comparator Type:Low Voltage; Time, Response:23ns; Output Type:CMOS/TTL; Current, Supply:6.5mA

CMP401GS

：

Analog Devices

：

16-SOIC (0.154", 3.90mm Width)

：

The CMP401 and CMP402 are 23 ns and 65 ns quad comparators with separate input and output supplies. Separate supplies enable the input stage to be

CMP04FS

：

Analog Devices

：

14-SOIC (0.154", 3.90mm Width)

：

Comparator Quad ±18 Volt 36 Volt 14-Pin SOIC N

CS30CL

：

STMicroelectronics

：

SC-74A, SOT-753

：

High side current sense high voltage op amp, 300uA, 24V, -40 to 125°C, SOT23-5L, Tape and Reel

MCP65R46T-2402E/CHY

：

Microchip

：

SOT-23-6

：

IC, COMP, LP, SINGLE, 6SOT23; Comparator Type:Low Power; No. of Comparators:1; Response Time:4µs; IC Output Type:Open Drain; Supply Current:2.5µA

MCP6N11T-005E/MNY

：

Microchip

：

8-TDFN (2x3)

：

600 uA 500 kHz Single Instrumentation Amplifier Gmin=+5.

HMC675LC3CTR-R5

：

Analog Devices

：

16-LFQFN Exposed Pad

：

support 10 Gbps operation while providing 100 ps propagation delay and 60 ps minimum pulse width with 0.2 ps rms random jitter (RJ). Overdrive and slew

HMC674LC3CTR

：

Analog Devices

：

16-LFQFN Exposed Pad

：

PECL output stages are designed to directly drive 400 mV into 50 Ω terminated to +1.3 V while maintaining compatibility with other PECL logic families